Previously PBI Height Safety

Kattsafe AP150 Mega Post Structural Mount Anchor

The AP150 mega posts are for use in situations where a fall arrest or rope access system needs to be raised above garden beds, or to reduce fall distance.
PBI_Logo_Asset_45_x_75_px-1

Specs & Details

  • Key features
  • Technical Information

The AP150 mega posts are for use in situations where a fall arrest or rope access system needs to be raised above garden beds, or to reduce fall distance. The mounting and adaptor plate allows multiple fall arrest system options to be used in conjunction with the structural mount mega post.

  • 15kN rated (fall arrest – including rescue)

  • 18kN rated (rope access - two persons including rescue)

  • High strength structural aluminium build

  • Various height options available

  • Can be used to raise various fall arrest systems including rigid rails, static lines, and anchor points

DIMENSIONS

  • Height options: 400, 600, 800 and 1000mm
  • Base plate: 400 x 400mm (anchor fastener spacing 300mm)

 

COMPLIANCE
The AP150 Mega post structural mount anchor is designed and manufactured to conform to requirements of Australian and New Zealand Standards AS/NZS 1891, AS/NZS 5532, AS/NZS ISO 22846, and relevant statutory WHS Codes of Practice/Guidelines.

TESTING
Testing and performance based on requirements of Australian & New Zealand Standard AS/NZS 5532:2013 and AS/NZS 1891

  • Dynamic load tested: 18kN
  • Static load tested: 18kN

INSTALLATION

Installation must be carried out by an accredited Kattsafe Fall Protection Certified Technician, and in accordance with the manufacturer's installation instructions. Can be installed during roof construction or as a retrofit from the top of the roof surface.

MAINTENANCE

Inspection and certification required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Australian and New Zealand Standards AS/NZS 1891 and AS/NZS 5532. (Refer installation manual)

WARRANTY

10 Years from date of purchase subject to correct installation. Use and maintenance to be in accordance with manufacturer’s specifications and recommendations. (This excludes wearing parts).

WARRANTY TERMS AND CONDITIONS

All warranty claims must be made in writing within 14 days of the appearance of the defect.

Incorrect installation or work done by a non-accredited Kattsafe installer will void all warranty rights.

Systems that have been installed using non proprietary equipment will void all warranties.

System roof/cladding and concrete penetration seals are not covered in this warranty.

Systems/components that have not been maintained in accordance with manufacturer’s/legislative requirements will void warranty.

Systems used by incompetent persons or use with non compatible accessories ie. harness gear, lanyards, travellers, fall arrestors etc. will void warranty.

Systems/components used for purposes other than their intended use will void warranty.

General wear and tear is expected and will depend on the frequency of use and is not covered by warranty.

idea

Have a project or question?

LET'S CHAT HEIGHT SAFETY - IT IS WHAT WE DO!

Lets Chat

Whether you’re after detailed drawings and a design specification or have a general questions about fall protection and working at height, we would love to hear from you.

For over 21 years our trusted team have been helping keep people and property safe at height. Afterall, making safety an instinctive culture is our vision. 

Looking to upload project details and engage with PBI Height Safety? Tell us about your project and upload drawings here. 

1