Kattsafe Skylight Protectors

MATERIALS
All lattice material and frame supports are manufactured from high grade structural aluminium with options for powder coating.

DIMENSIONS

• SP391: 3080/2060mm(l) x 835/1250mm(w)
• SP395: 1200/800mm(l) x 1250/835mm(w) x 300mm(h)
• SP396: 1650/1450mm(l) x 1650/1450mm(w) x 300mm(h)

Specify height and ensure a 100mm nominal clearance between skylight and mesh cover.

RATING

• Not designed to take trafficable loads
• 200kg limit
• Support structure integrity, suitability and fixing method to be assessed and determined by a competent person prior to installation.

COMPLIANCE
Skylight protectors are designed to comply with relevant statutory OHS codes of Practice/Guidelines.

TESTING
Tested to 500kg for 3 minutes utilising stainless steel clips and structural rivets.

INSPECTION AND MAINTENANCE
Visual inspection for any damage or loose fixings must be done periodically and prior to use. No certified maintenance required. Basic wear/ tear preventative maintenance is recommended, as per manufacturer’s specifications and recommendations. (Refer instruction manual.)

PRODUCT WARRANTY
10 Years from date of purchase subject to correct installation. Use and maintenance to be in accordance with manufacturer’s specifications and recommendations. (This excludes wearing parts).

WARRANTY TERMS & CONDITIONS
All warranty claims must be made in writing within 14 days of the appearance of the defect.

Incorrect installation or work done by a non accredited Alta system installer will void all warranty rights.

Systems that have been installed using non proprietary equipment will void all warranties.

System roof/cladding and concrete penetration seals are not covered in this warranty.

Systems/components that have not been maintained in accordance with manufacturer’s/legislative requirements will void warranty.

Systems used by incompetent persons or use with non compatible accessories ie. harness gear, lanyards, travellers, fall arrestors etc. will void warranty.

Systems/components used for purposes other than their intended use will void warranty.

General wear and tear is expected and will depend on the frequency of use and is not covered by warranty.