Innotech Taurus Structurally Mounted Universal Rail System

INSTALLATION

Installation must be carried out by an Accredited Innotech trained Technician and in accordance with the manufacturer's installation instructions. The rail can be mounted above, on the wall, or below the users. It can also be mounted on raised posts (maximum of 3m apart) or directly into steel structures, concrete, or onto ladders.

MAINTENANCE

As per AS/NZS 1891.4 Innotech Taurus Rail must be certified every 12 months by a qualified height safety equipment inspector. All of the exposed materials in the system have been specified as naturally corrosion-resistant, or have been coated with sacrificial coatings to prevent oxidization of the base material. It is important to consider that in some environments the system may need to be cleaned to gain the best possible life expectancy from the materials.

WARRANTY

Under normal use conditions there is a two year warranty on all components against manufacturing defects. However, if the restraint system is used in particularly corrosive atmospheres, this period may be shortened. If there is strain, (a fall, weight of snow, etc) the warranty claim is voild for those components that have been designed to absorb energy, or that may possibly be deformed and therefore must be replaced. Attention for system installation and components planned and installed under the responsibility of specialised installation companies, INNOTECH assumes neither responsibility nor warranty in the case of improper installation.